Description
Technical Specification :
UPPER COMPARTMENT- DEEP FREEZER
Temperature Range: -10°C to -30°C | Accuracy: ≤ +/- 3.0°C | Uniformity : +/- 5.0°C* |
UPPER COMPARTMENT- DEEP FREEZER
Temperature Range: 2°C to 8°C | Accuracy: +/- 1.0°C | Uniformity: ≤ +/- 2.0°C* |
Models |
Internal size in mm |
External size in mm on |
Tray Qty. |
Tray Size in mm |
Connected Load |
---|---|---|---|---|---|
AO/DC100 LTR+200 LTR |
620Wx600Dx350H |
825Wx1085Dx1760H |
1 |
540Wx600Dx30H |
0.75 KW |
620Wx600Dx600H |
3 |
540Wx600Dx30H |
0.75 KW |
*Measured with high accuracy data-logger at sample storage area with standard Set Point
*Dual Chamber also available as per customized or Made to Order dimensions and requirements like: CC+Incubator, Incubator+Incubator, Stability + Stability
Standard Chamber Features & Provisions:
Construction: Dynamically Designed PUF filled Double walled, Inner Tank & outer body with SS 304 with PUF Density of 40Kg/m³ with thickness 60mm OR 100 mm depending on the chamber combination.
Sample Storage: Trays: Perforated types (CNC punched). Strengthened with support rails to prevent deformations, Height adjustable to every ½”
Door: PUF Insulated External door mounted with imported hinges & locks, Inner glass doors with latches. Door frame is secured with a silicone rubber gasket on the entire perimeter to ensure an air tight, leak tight chamber.
Door Operation: Biometric &/or Password protected-from software & HMI
Control System:
- Ergonomically designed Control Panel.
- Ferrule printed wiring.
- Advanced PLC Program with built in processor-based Auto Tuning.
- 2 X 4.3″ HMI Color LED Display. (Individual HMI for each chamber)
- Built in Redundancy & Safety.
- Advanced High Accuracy “Transmitter Sensors” with output of 4-20 mA.
Temperature Control:
- Efficient, Reliable, Time tested & Trustworthy Refrigeration Design.
- Built in redundancy with PLC based Auto Change Over during power outage or component failure viz: Compressor, Humidification system
- PLC Controlled “U” Shaped SS Air Heater Banks.
Humidity Control: S S Reservoirs- steam kettles forms Humidification system(for Stability/Humidity Chamber)
Safety: Dedicated Thermostats for all key points: Chamber High Temperature, Steam Kettle Element (for Stability/Humidity Chamber), Utility High Temperature.
PLC Safety Cut Off for Temperature & Humidity: High, Higher & Low, Lower safety cut off.